T10 timing belts are available in various versions. As an open length, we can supply the T10 in any desired length, up to lengths of up to 100 metres. This also applies to a T10 in the welded version. The T10 Flex is a version that is specially made for length by winding the cords. This T10 does not have a welded connection and is therefore stronger. The T10 Flex is bound to a minimum and a maximum length.
The T10 PU timing belt is standard delivered with steel or kevlar cords. Reinforced steel cords, extra flexible cords and stainless steel cords are also available. The T10 PU toothed belt has a pitch of 10mm and has a trapezoidal tooth according to DIN 7721 and is, due to its accuracy, extremely suitable for transport where good positioning is required. We can customize the T10 PU toothed belt according to your wishes:
|Shore hardness||92° Shore A||Weigth per meter||+/- 48 g/10 mm belt width|
|Tensile members||steel cords, 0.6 mm||Minimum number of pulley teeth||12|
|Width tolerance||+/- 0.5 mm||Minimum pulley diameter||36.35 mm|
|Thickness toler.||+/- 0.3 mm||Minimum counter bending||60 mm|
|Length tolerance||+/- 0.8 mm/m|
|Standard widths mm (in-between sizes possible)|