+31 (0) 314 393751
08-17 / all business days

Timing belt joints

 

 Tandriem gelaste verbinding

 

Endless with a splice

The standard PU timing belts are made endless by using a finger joint..

This joint has about 50% of the strength compared to a truly endless (flex/moulded) timing belt but is used for almost all transport solutions.

 

 

PU tandriem gewikkeld

Gewikkeld/Flex

For drives and heavy transport a truly endless timing belt is often used.

These belts are available in the most standard lengths and are stock items.

If longer then 1500 mm the belts will be produced especially on length (flex belts) and are deliverable up to a maximum length of 20.000 mm – always a multiple of the tooth type.

 

 

PU tandriem met PinJoin

 

Pin Join 

The timing belt joint PIN-JOIN is designed for a singular connection of timing belts directly into the application on site.

The Pin Join timing belt can be fitted as a quick assembly when required, with this system a toothed belt can be changed within 15 minutes.

This connection is also possible for all common types of belt including double sided toothed belts.

The Pin Join timing belt can also be used to Join belts with coatings and cleats.

The maximum load is 50% of the maximum load of an endless welded belt. However, it is also possible to produce an extended Pin Join connector, should the belt be subjected to heavier loads.

 

 

 

Breco DC verbinder

 

Breco C, DC, DC-pro connector 

These connectors are like the Pin Join connector a mechanical connector, but only in combination with Breco ATN timing belts.

In difference to the Pin Join connector this connector can be disassembled.

 

 

Spiraal verbinding 

Hinge joint

 

 

 

 

There are no products in this category.

Product groups

Contact us:
We export worldwide, if you have any inquiries, feel free to call us at, use our chat or send us an email:
Image is not available
Image is not available
Image is not available
Image is not available
Image is not available
Image is not available
Slider