The wide 3M timing belt (FG-T3) is supplied in the blue colour and, because of the FDA approval, is mainly used in the food industry but also in applications where small transitions are required (min. disc diameter 19 mm).
Wide Belt Specifications
FG-T3 | |||
Pitch (Imperial and metric) | 3 mm | ||
Ultimate Tensile Strenght per 25mm Belt Width | Kevlar | N/25mm | 1870 |
Max. Allowable Tensile Strenght per 25mm Belt Width | Kevlar Welded | N/25mm | 315 |
All. Effective Tension for the Belt Teeth | N/25mm | 440 | |
Specific Belt Weight | Kevlar | kgf/m/cm | 0,020 |
Specific Belt Stiffness (open Ended) | Kevlar | N/mm | 2580 |
Min. No. Of Pulley Teeth | 20 | ||
Min. Pitch Diameter (inch or mm) | 19 mm | ||
Min. Diameter of Tensioning idler Running on Back of Belt | 30mm | ||
Avaiable in FDA 85 shore A Urethane | Yes | ||
Standard Color | White/Blue | ||
Min. Welded Belt Lenght | 1100 mm | ||
Standard Roll Length | 60 m | ||
Standard Slitting Lanes | 25 mm | ||
Min. Width Available | 100 mm | ||
Max. Width Available | 450 mm | ||
Width Tolerance | +/- 1,0 mm |